Pressure Treated Wood Speaker

Best Pressure Treated Wood Sealer 2020

When working with woods for special projects like building speakers, it is best to use pressure-treated wood for its added benefits. Woods that have been pressure treated acquire properties, such as longer resistance to damage from termites and fungal decay. Having the best pressure treated wood sealer ensure that you and your customers will get to enjoy the musical accessory longer than when you have used materials that are not intended for the purpose.

 Most items made of wood are durable. They also never go out of style. Items made of wood reflect sophistication and have a lot of personality. Pieces of furniture and other woodworks reflect timeless elegance. Nonetheless, they still need to be preserved to prevent them from rotting. Any wooden material that is left untreated will sooner or later be infested by bacteria, fungus, insects, and other elements, then begin to decompose. How quickly changes happen will depend on factors such as the type of wood and the environment it is constantly subjected in.

 Methods of Preserving Wood

 Wooden items that are constantly exposed to wet or damp conditions, such as decks, fences, and wooden garden furnitures will break down faster than those that are kept in a covered space. Whether these are items that are smaller in size, such as a set of wooden garden furniture or entire building, if they are not kept protected against disintegration, these wooden items will not be good enough to sustain its existing condition, then just break in the process sooner or later. If treated properly, wood can last for years, even decades, however.

There are many ways used to preserve wooden items. Chemicals, such as water-borne preservatives, oil-borne preservatives, and light organic preservatives, are used for pressure treatment processes. Non-pressure process of wood preservation, such as brush and spray treatment, steeping, as well as using natural treatments, like copper plating, heat and mud treatments, increase the durability of the wood and its decay-resistance property.

Pressure Treated Wood

Pressure treated wood is a type of wood which is specifically designed to be used for projects that are expected to be constantly exposed to the elements. They are treated with chemicals to make them resistant to termite infestation, as well as to the effects of getting exposed to the changing temperature.

 Working With Pressure Treated Wood

 To have the best results when working with pressure treated lumber, be reminded of the following:

  • Freshly treated wood may still be damp or even swollen after the treatment process or after being exposed while in transit or while in a storage that usually has a high humidity level. To have the best results from your treated lumber, you may just want to wait until the treated wood has died out thoroughly.
  • When working with pressure treated wood, it is best to use premium triple-coated, hot-dipped galvanized or stainless steel fasteners as well as metal components. Regular steel fasteners will rust because of the large amount of copper that has been used to treat the wood.
  • Drill pilot holes when you are within one inch of the end of a board that you are fastening to lessen the possibility of getting the wood cracking and splitting. Make sure to fasten ends of boards securely on the inside joints as well as on the ends.
  • Use an adhesive that has been specifically formulated for pressure treated lumber to help reduce cupping and warping when fastening.
  • Add a layer of protection to your treated lumber by applying a clear or semi-transparent water-repellent coating to minimize the effects of natural weathering. Check the board or the item that you are purchasing for any signs of inappropriately treated lumber, such as warping, shrinking, twisting, swelling. Apply a sealer on a finished project to even extend the life of your pressure treated wood speaker.

 Safety Reminders When Using Pressure Treated Wood

 Some of the approved preservative products used in treating wood poses a limited risk to the public and should be disposed of properly. To ensure the safety of everyone who gets in contact with the treated wood, as well as those who have been exposed to the chemical treatment, it is best to consider these safety precautions as well.

  •  Clearing the project area should never be done carelessly. Dispose of sawdust and construction debris after construction. Scrap pressure treated wood may be disposed of in landfills. They can also be burned in commercial or industrial incinerators or boilers following federal, state, and local regulations.
  • Wear appropriate safety wear. Wearing a dusk mask, goggles, and gloves when cutting or sanding wood is a must.
  • Some of the chemicals used as wood preservatives may trasfer to the soil, water, and air, so make sure to wash your hands and other parts of the body that were exposed while working with pressure treated lumber.

 A single piece of wood goes through a lot before becoming a part of the best pressure treated wood speaker or other wooden item that you may require. It pays to have a basic understanding of what makes these pressure treated lumber pieces work their magic.

About the author